|Min. Order:||300 Piece/Pieces|
|Delivery Time:||20 Days|
Model No.: SV-612WF
TV System: NTSC/PAL
Mini Illumination: 0 LUX [IR ON]
Video Output: 1.0Vp-p75ohm
View Angle: 135°[D]
Waterproof Rating: IP68
Image Sensor: 1/3" CMOS
Resolution: 550TV Lines
Pixels Array: 648*518 Pixels
Power Voltage: 9-36V
Current Consumption: 150mA
Packaging: Carton Box
Place of Origin: China
Supply Ability: 100000pcs/Month
HS Code: 8525801390
Before installing, make sure you connect the power cable and antenna to the camera.
Step 1: Choose the camera locations.
Step 2: Install all cables in vehicle,when necessary a small hole should be drilled for passing the power cable through vehicles walls.Install the mounting bracket where applicable.
Step 3: Locate the reversing lights or running lights wiring on your vehicle.You may need to remove the interior panel in order to locate.Connect the red wire of the power cable to the positive and the black wire to the ground.
If you're using ACC to power the camera, you need to start your vehicle and if you power the camera with a reverse light, you need to put your vehicle in reverse.
After you powered the camera,you should open the wifi list of your devices.Please find a hot spot that starts with SWD and connect it.If you can't find it, maybe you have something wrong in the camera wiring. Please check the camera wiring again.
Contact Person: xionglijun
Address: 6F/8F,Mantong Building,Dafu Industrial Zone,Guanlan District,Shenzhen,Guangdong